• STIL B.V., Delft
  I was part of the STIL actuator development team that ensures a stable
  future for people with Parkinson's.

• Mainblades inspections, Den haag
  My job was to create a communication protocol between a LIdar and a DJI
  drone. Using this communication protocol, Mainblades inspections were
  able to read out the data from the LIdar from the ground.

• Sanitronics internationaal B.V., Rotterdam
  My job was to improve the HMI for the WAGO PLCs, create the program
  that ran on the PLCs and build the PLC cabinets for the Sanitronics
  machines. For the new machines I designed an HMI for the Exor screens in
  Jmobile.

• Prime Vision, Delft
  The assignment was to make a robot arm that could be attached to Prime
  Vision's mobile robot platform. This robot arm was programmed with an
  Arduino and was able to pick up packages from racks in warehouses.

• Viscon Group, S'gravendeel
  I programmed machines for the Hatchery department of Viscon in
  Siemens TIA portal. I performed activities related to the improvement of
  existing programs and the development of new programs. With the new
  programs it was also my job to design an appropriate HMI.

• Aweta, Pijnacker
  At Aweta I was mainly responsible for programming frequency inverters of
  the type; Bosch rexroth, Bonfiglioli, Yaskawa and Omron. In addition, I was
  part of the commissioning of the sorting machines. I designed a new
  interface for Aweta at the request of their customers in Weintek.

• Mechs 'n Motion, Berkel en Rodenrijs
  I am in self-employment to program and commission PLCs all over the
  world, remotely or on site. If requested I will deliver a new HMI design for
  your machine. I have had the pleasure of working with the following companies so far:

- Frames group; energy solution technologies

- Plug power; Hydrogen and fuel cell product solutions

- Akerboom; Yacht equipment